CONTACT US
Name | Item | Use |
---|---|---|
Highly transparent thermoplastic elastomer injection plastic | YHS70021-GT | High transparency, high environmental protection, high abrasion resistance, used in medical masks, blood bags, pacifiers, toys, load-bearing casters, etc. |
Highly transparent thermoplastic elastomer extrudate | YHS70022-GT | High transparency, high environmental protection, high wear resistance, high strength, used for infusion sets, tourniquets, special transparent extrusion products, etc. |
Highly transparent thermoplastic elastomer material is based on SBS, SEBS or TPU, adding special modifiers, antioxidants and other auxiliaries, and mixing, plasticizing and granulating. The product not only has the advantages of high transparency, high abrasion resistance, high resilience, but also has excellent mechanical and physical properties, tear resistance, electrical properties, and processing properties. It can also increase properties such as different hardness and transparency according to customer needs . This product does not contain halogen, heavy metals, phthalates, and complies with EU RoHS, REACH and other environmental protection directives.
When the storage time is long or the environment is relatively humid, or the product surface requirements are high, the pellets can be dried in a hot air hopper at 50-60 ° C for 1 to 2 hours before use.
MG80021-GT can be processed by general injection molding machine. Due to the difference between the actual temperature and the value indicated by the temperature control meter, it depends on the type of injection molding machine. Suitable temperature. The following temperatures can be used as a reference for commissioning:
Position | Feeding section | Middle section | Front section | Die section |
---|---|---|---|---|
Temperature | 160±10 | 190±10 | 200±10 | 210±10 |
MG80022-GT recommends screw extrusion with L / D≥25 and compression ratio of 2.0 ~ 3.0: 1. The screw should be cleaned before extrusion to ensure the cleanliness of the product. It is recommended to use 80 mesh or 100 mesh filter to avoid impurities in the extrusion process, while ensuring the melt pressure to obtain a good appearance and material compactness. Because the difference between the actual temperature of the melt and the value indicated by the temperature control meter varies with the type of extruder, users are requested to choose the appropriate temperature according to the specific situation of the extruder used. The following temperatures can be used as a reference for commissioning:
Position | Cylinder I | Cylinder Ⅱ | Cylinder Ⅲ | Cylinder Ⅳ | Cylinder Ⅴ | Head and mold |
---|---|---|---|---|---|---|
Temperature | 160±10 | 185±10 | 195±10 | 195±10 | 200±10 | 210±10 |
(25 ± 0.2) kg / bag, inner aluminum plastic composite bag, outer kraft paper bag (or customer specified packaging)
Stored in dry and ventilated place
Prevent sun, rain and water
Storage period is 6 months
Test Project | Units | Typical values | |
---|---|---|---|
YHS70021-GT | YHS70022-GT | ||
Density | g/cm3 | 0.98-1.25 | 0.98-1.25 |
Hardness | Shore A | 50-98 | 60-98 |
Melt Finger (230 * 5KG) | g/10min | 4.0 | 1.8 |
Original tensile strength | MPa | 15.0 | 28.0 |
Original elongation at break | % | 550 | 630 |
Air thermal aging | ℃ ×h | 136×168 | |
Change rate of tensile strength | % | -10 | +8 |
Change rate of elongation at break | % | -18 | -15 |
Low temperature impact embrittlement temperature | ℃ | -40 pass | -40 pass |
Tear strength | N/mm | 30 | 50 |
20°C volume resistivity | Ω.cm | 2.0×1014 | 3.0×1015 |
Oxygen Index | % | - | - |
Thermal deformation (90 ° C * 4H) | % | 15 | 10 |
Halogen acid gas content | mg/g | 0 | 0 |
Flame retardant rating (UL94) | - | - | - |
Note: The above data is a typical value obtained by testing the product and is not a standard for testing restrictions.
Hot-line:
86-17751236208
Telephone:
86-21-61807268
Mail:
ADEN@SHYHSGROUP.COM
ADD:
16th Floor, Business Center, 800 Quyang Road, Hongkou District, Shanghai