CONTACT US
Name | Item | Use |
---|---|---|
105 degree PVC charging pile cable insulation | YHS70025J-105CD | Good flexibility and good electrical properties |
105 degree PVC charging pile cable sheath material | YHS70025H-105CD | Good softness, scratch resistance, oil resistance, cold resistance |
105 degree PVC charging pile cable sheath soft material | YHS70025RH-105CD | Supersoft, good scratch resistance, oil resistance, cold resistance |
Polyvinyl chloride sheath material is made of polyvinyl chloride resin as base material, and it is mixed and plasticized by adding plasticizer, light and heat stabilizer, antioxidant, etc. Has excellent mechanical properties and processing properties. The product complies with GB / T33594-2017; UL62 and other standard sheath series and meets European and American environmental standards such as ROHS, REACH, PAHS, etc., and is widely used in the field of electric vehicle charging gun cables.
When the storage time is long or the environment is humid, or the product surface requirements are high, the pellets can be dried in a hot air hopper at 60-70 ℃ for 1 to 2 hours before use.
Take Φ 75 double cone extruder as an example, the ideal melt temperature range is 160 ~ 180 ℃ , the heating zone should be 140-175 ℃ , check the die temperature carefully before starting (ideal temperature is 170 ℃), avoid scorching Or poor plasticity, eccentricity, etc.
(25 ± 0.2) kg / bag, inner aluminum plastic composite bag, outer kraft paper bag (or customer specified packaging)
Stored in dry and ventilated place
Prevent sun, rain and water
Storage period is 6 months
Test Project | Units | Typical values | ||
---|---|---|---|---|
YHS70025J-105CD | YHS70025H-105CD | YHS70025RH-105CD | ||
Density | g/cm3 | 1.30 | 1.37 | 1.29 |
Original tensile strength | ≥MPa | 14.2 | 16.5 | 13.5 |
Original elongation at break | % | 420 | 370 | 479 |
Thermal aging of air after irradiation | ℃ ×h | 136×168 | 136×168 | 136×168 |
Tensile strength retention | % | 106 | 110 | 110 |
Elongation at break retention | % | 95 | 88 | 88 |
Low temperature winding | ℃ | -40 pass | -40 pass | -40 pass |
20°C volume resistivity | Ω.cm | 2.0×1013 | 2.0×1012 | 2.0×1012 |
200 ℃ thermal stabilization time | Min | ≥50 | ≥50 | ≥50 |
Oxygen Index | % | 26 | 26 | 25 |
Hardness | Shore A | 85 | 85 | 72 |
Thermal deformation | % | ≤40 | ≤40 | ≤40 |
Note: The above data is a typical value obtained by testing the product and is not a standard for testing restrictions.
Hot-line:
86-17751236208
Telephone:
86-21-61807268
Mail:
ADEN@SHYHSGROUP.COM
ADD:
16th Floor, Business Center, 800 Quyang Road, Hongkou District, Shanghai